Automatic Edgebander | Flexy GS (With Glue Scraper) | 3 Phase | (18ft/.min.) | edgebanding Max 3mm | 8 to 50mm panels | Min. Panel Width 75 mm (2.95”)
*FINANCING AVAILABLE, GET IT TODAY & START PAYING IN 6 MONTHS!* Contact us for more info*
-FREE SHIPPING IN US
(Glue Recommended 282.20/21)
The FLEXY is a compact and high-performance edgebander. It is the most affordable model featuring a full cabin for protecting all the working groups as well as an end trim unit with HF motors and two sawblades performing the front and the rear trim cut cycles.
Panels: Particle board, plywood, MDF... from 8 to 50mm thick.
Edges: Melamine, PVC, ABS, PP, wood, formica, acrylic... 0,4 to 2mm in rolls.
Adhesives: Hot melt EVA and PUR (optional).
Equipment: High frecuency motors controlled by independent electronic inverters, gluepot, end trim, top & bottom trim and PLC controlled by a colour LCD touch screen.
All versions of this series allow the installation of buffing units and glue scraper as optional groups on the end of the machine.
TECHNICAL INFORMATION:
Edgebanding material Melamine, PVC, Polyester, Wood, Formica
Working speed 5.5 mts/min. (18ft/.min.)
Thickness of edgebanding 0.4 – 2mm (0.016”-0.12”) *3mm up to 23mm (7/8”)
Thickness of the panel 8 – 50 mm (0.31”-1.96”)
Min. Length of the panel 120 mm (4.72”)
Min. Width of the panel 75 mm (2.95”)
Electrical connection 3phase x 220V / 60 Hz
Amperage 10 amps
Dust extraction 4¾ “ outlet @ 1200 cfm
Compressed air connection 5 cfm @ 90 psi
Dimensions 3065x630x1370 mm (121”x 25”x 54”)
Net weight 670 kg. (1,477 lbs.)
FEATURES:
CONTROL PANEL 5,6”Robust 5,6” TFT colour touch LCD with LED backlighting, multi-language support and 128 Mb of memory for storage of screen data and job programs.
FEEDING STATION
Timer controlled automatic feed allowing the precise adjustment of the in-feed surplus and minimizing the waste of edging material. Pneumatic pre-cut guillotine (fit for PVC/ABS edges of up to 3 mm thickness).
GLUE POT UNIT
New design with improved thermodynamics, granting a shorter heating time with less power consumption.
Automatic temperature control by electronic thermostat preventing the scorching of the glue when the machine is idle.
Full TEFLON® coating of the whole assembly.
|
Power consumption |
2,5 kW |
|
Heating time |
10 min |
|
Capacity |
1,5 Kg. (3.3lbs) |
END TRIMMING STATION
|
Engines power |
0,21 kW (.28hp) |
|
Saws rotation speed |
12.000 rpm |
|
Saw disk |
100 x 32 x 3 mm (Z30) (3.94” x .26” x 0.12”) |
TOP AND BOTTOM TRIMMING STATION
This station has 2 separate units for trimming off the excess edging material along the upper and the lower edges of the panel.
It has horizontal and vertical tracers with SIKO digital readouts for easy and precise adjustment. The two independent units are equipped with milling cutters. It also includes roller type tracers for work with high gloss and 3D effect panels and edges.
|
Engines power |
0,27 kW (.36hp) |
|
Rotation speed of the cutter heads |
12.000 rpm |
|
Milling cutters size |
65 x 20 x 20 mm (Z4) R2 (2.56”x.79” x.79” ) |
2 POSSIBLE OPTION :
GLUE SCRAPER + FREE SPACE
Designed to remove possible rests of glue on the top & bottom surfaces of the panel.
It has two blade holders with independently adjustable vertical copying devices and also blow nozzles for tracer cleaning.
Manual positioning of the station in ON/OFF position.
