** FREE SHIPPING **
Our top-of-the-line solution is designed to make edge banding a breeze. With its advanced technology and user-friendly interface, the RapidEdge Pro can apply edge banding to your projects in record time, without sacrificing quality or accuracy. Rapidly change over from various edge thicknesses and finishes right from the control panel. Its compact size and easy-to-maneuver design make the RapidEdge Pro the ideal edgebanding solution for use in any workshop or manufacturing setting.
Why Cantek RAPIDEDGE PRO Automatic Edgebander?
- Rapid application: The RapidEdge Pro can apply different thickness of edge band from 0.5mm to 3mm to your projects with rapid changeover speed allowing for optimal production output.
- Precision accuracy: With its advanced trimming system, the RapidEdge Pro ensures that your edge banding is perfectly aligned and trimmed every time.
- Easy operation: The RapidEdge Pro’s intuitive interface makes it easy for anyone to operate, regardless of skill level or experience.
- Durable construction: Our machine is built to last, with sturdy components that can withstand the rigors of daily use.
Touch Screen Interface
- State of the art touch screen interface allows the operator to control various machine functions
- Change from flush trim, to chamfer, to radius trim right from the control panel
- On screen error diagnostics
- Temperature setting with automatic temperature lowering
Cantek RAPIDEDGE PRO – Open View
Equipped with a single access door to allow easy access to the working units for machine adjustments and minimize the noise during operation
Touch Screen Interface
HMI control system reduces manual settings to a minimum and enables a quick, easy, and intuitive selection and control of the aggregate as well as the complete monitoring of a wide range of machine functions from the screen. Its graphic interface is easy to use. It has on board error diagnostics which allow for quick identification of any fault leading to a quick resolution
Heavy-Duty Chain Feed
The steady workpiece feeding system comprises a driven chain with rubber-covered chain pads and dual row of top idle pressure rollers. This system ensures the workpiece is held firmly and travels smoothly during the machining process to ensure the optimum edge quality
Pre-Milling Unit
(2) counter-rotating diamond cutterheads for removing up to 3mm of the panel edge to produce an optimum edge for applying the edge tape. This is designed to clean up edges that are poorly machined
Quick Change Glue Pot
The 2.6 lb Teflon-coated glue pot is designed for EVA hot-melt glue. The glue is applied by a roller and the glue amount is adjustable. The glue pot is a quick-change type and can be removed and replaced in less than 1 minute. Excellent for fast glue color change or maintenance. The machine comes with (1) glue pot and additional pots are available for purchase.
Guillotine Shear
The guillotine shear can rough trim coiled material up to 3mm in thickness
Pressure Rollers
The pressure roller unit consists of one large roller, followed by a smaller one. The purpose of the unit is to improve the glue bond between the edge and the material. Due to the ‘quick’ setup system, the unit is mechanically spring-loaded and can be adjusted exactly to the required edge thickness. The adjustable spring system allows for a perfect bond between the panel and edge every time.
End Trimming Unit
The end trim system is a single motor with (2) saw blades. The unit is mounted on high-precision linear guide rails, ensuring perfect cutting results for years to come. The high-frequency 12000 RPM motor meets any challenge regardless of edge type and thickness
RAPID Setting Top & Bottom Trimming Units
Equipped with (2) high-frequency motors for top & bottom trimming of the panel. The RAPID adjustment system uses a pneumatic 3-position adjustment to quickly change from 0.5mm, to 1mm, to 2mm edgebanding. This is done directly from the control panel without the need to open the cover and make manual adjustments
Each high frequency motor has an insert knife cutterhead which can be adjusted from flush to bevel finish for thin edges and radius trimming (2mm radius) for thicker edges is quick and easy. The high-frequency 12000 RPM motors produce a fine finish on edge materials. The motors are adjusted in and out using precision mechanical readouts for fast and accurate adjustment
Corner Rounding Unit
Completes the finishing of the ends of the workpiece when applying edges that require a radius end. Two high-frequency motors are provided for R1: 1mm and R2: 2mm radius edge. A quick-change feature allows the operator to rapidly change between each motor according to the edge being processed. The motor and cutter can be adjusted in and out when necessary using a precision mechanical readout for a fast and accurate setting. Once the motor is positioned correctly however it can be returned immediately to that setting.
Multi-Radius Profile Scraping
The radius scraping unit fine-tunes the edge radius while removing knife marks during the milling process on radius edging. The dual radius system allows the operator to apply a 1mm or 2mm radius and is selected automatically from the control panel without need for manual adjustment
Flat/Glue Scraping
Flat insert knives designed to remove any excess glue which remains on the surface of the panel after applying the edge due to squeeze out
Buffing Units
The buffing unit leaves a super finish on ABS and PVC edging and removes any discoloration on the edges, which is especially noticeable when working with dark edge material
Release Agent Spray Unit
Applying release agent to the top and bottom surface of the panel prior to applying the glue and edge allows for simple removal of any excess glue. The unit is located before the pre-milling station so any overspray which gets on the edge will be milled off to ensure proper bonding
Cleaning Agent Spray Unit
The cleaning agent system sprays the top and bottom of the machined edge on the processed workpieces. It is installed before the buffing unit and is designed to polish the edge and loosen any excess glue residue on the surface of the panel
FEATURES
- Automatic edge feeding with a thickness capacity of 0.4-3mm; strip material can be hand-fed
- Conveyor chain feed system for reliable results
- Teflon-coated quick change hot-melt glue pot
- Heated infeed fence for pre-heating the panel for optimum glue penetration
- 29 FPM feed rate
- Workpiece is fed by chain
- Edge coil support plate: Ø 31½” for PVC/ABS
- Spring-loaded pressure unit with (2) pressure rollers
- Heavy-duty pressure beam with extendable workpiece support
SPECIFICATIONS
- Feeding Speed: 29 FPM
- Panel Thickness: 0.315” - 1.77”
- Edge Thickness: 0.0158” - 0.118”
- Min Panel Width: 3.54”
- Min Panel Length: 6.7”
- Working Table Height: 38”
- Extension Support Width: 22”
- Dust Collection Outlet: Ø 5” x3
- Air Consumption: 12.36 CFM
- Electrical Requirements: 230V Three Phase 60Hz 11.4HP
- Machine Dims: 155” x 28” x 68”
- Approx Weight: 2,024 lbs
MOTOR SPECIFICATIONS
- Feeding Motor: 1.5 kW
- Pre-Milling Motors: 1.5 kW
- Glue Spindle Motor: 0.25 kW
- Front/Rear Trimming Motor: 0.22 kW
- Upper Trimming Motor: 0.37 kW
- Lower Trimming Motor: 0.37 kW
- Corner Rounding Motor: 0.37 kW
- Upper Buffing Motor: 0.18 kW
- Lower Buffing Motor: 0.18 kW
- Pre-Heating: 0.4 kW
- Gluepot Heating: 1.315 kW
OPTIONAL Add-Ons
- Lower trimming cutter insert (R=2mm)
- Upper trimming cutter insert (R= 2mm)
- Flat scraper cutter (FLAT)
- Radius scraper cutter (R=1mm/2mm)
- Diamond corner rounding cutter (R=1mm)
- Diamond corner rounding cutter (R=2mm)
- Diamond trim cutterhead set lower (R=2mm)
- Diamond trim cutterhead set upper (R=2mm)
- Additional quick-change glue pot
