Coping Machine PMK NEW C-1203 PLC / HSK with Quick Change Spindles & 8” Touch Screen Monitor

$58,990.00

If you’re a professional woodworker who puts quality first and wants the ability to increase production, PMK is the Solution. THE C-1203 PLC / HSK IS RELIABLE, HEAVY DUTY, TESTED & PROVEN.  A PMK patented design provides chip-free coping or end-matching of squares or profiled parts without the need of a back-up piece or chip-breaker. Powered by 2 (two) 7.5 hp motors and direct drive spindles rotating from 6,000 to 9,000 rpm (variable speed) controlled with PLC & monitor.  The C-1203 has a small foot print. Features include THK style rails for the guidance of carriage stroke and a hold-down clamp. The side pressure clamp ensures proper alignment with the fence. Machine features and specifications are detailed on the attached page.

Terms:

  • FREE INSTALLATION
  • FREE SHIPPING IN UNITED STATES
  • Allow 8 to 10 weeks manufacturing time after purchase.
  • Tooling not included.

 

Technical Information:

  • 2 Direct Drive 7.5 hp. Motors, 230 / 460 volt (please specify your voltage).
  • Machine has a range of RPM’S from 6000 to 9000 controlled by touch screen monitor.
  • Machine does a self-diagnosis of itself at start up.
  • Maximum part size 1” thick by 13.5” wide.
  • Comes with 4 HSK 63F tool holders.
  • Minimum part size 3” long.
  • Max Depth of cut ¾” depending on profile and density of wood.
  • weight 1575 lbs.
  • Cycle time 5 to 10 seconds.

C-1203 PLC / HSK MACHINE SPECIFICATIONS

 

Motor

2 (two) 7.5 hp motors – 230/460 volts (please specify your voltage).

Cutter diameter

Minimum 3.5” OD

Maximum 5” OD

Maximum SIZE part

1” thick depending on profile & density of wood

9 ½” wide.

Minimum part length

3” Depending on cutter Dimension

Minimum thickness

5/8”

Maximum depth of cut

¾” depending on profile & density of wood

Minimum part width

Determined by the O.D. of the cutter and if the part is profiled or not.

Part length

Unlimited

4 (four) HSK 63F SPINDLES/TOOL HOLDERS

Tool holder / Milling arbor 1.25”  

6 Additional tool holders.

Spindle length

55mm, 2.165”

Dust Hood

With 5” port

1000 cfm required

C-1203-foot print

Air Pressure (Required)

Width 60” / Depth 32” / Height 64”

100 PSI, air line 5/8” Día for more volume

Machine weight

1,939 lbs. (+/-)

 

You recently viewed

Clear recently viewed

Customer Reviews

Based on 0 reviews
5 Star
0% 
0
4 Star
0% 
0
3 Star
0% 
0
2 Star
0% 
0
1 Star
0% 
0
Write a Review
  • Reviews

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!