FREE Shipping in the USA!
Kleiberit 773.8 NATURAL EVA Holt Melt adhesive High Temperature.
Fields of application
Bonding of
- Polyester edges
- CPL and melamine resin edges, also called thin edges
- PVC and ABS edges (primed)
- Uncompressed resin-impregnated paper edges
- Solid Wood and veneer edges
Advantages
- Good post-melt properties
- Very Clean processing
- No Stringing
- High green strengh
- Can be for fast processing machines also
-
Suitable for Cantek MX370 and Maksiwa CBC.PCR
Attention
When hot melt adhesives are melted and applied, vapours are set free and an unpleasant odour can occur, even if the recommended working temperature has been observed. Moreover if the prescribed working temperature is exceeded over a longer period, harmful decomposition products can develop. Precautions should be taken to eliminate the vapours, e.g. by using a suitable ventilation system.
Application devices
• Automatic edge banding machines with roller application
Temperature control:
Regularly check the temperature directly at the application system by means of a laboratory thermometer, a bimetal thermometer or by a thermometer with electric contacts. Readjust it, if necessary.
The thermometers installed in the machine may give incorrect readings after extended use.
Line feed:
8-50m/min.
Higher speeds only after own testing.
Application quantity:
The quantity to be applied should be adjusted in such a manner as to slightly show on the edge of the part to be glued. In order to check whether the adhesive film is continuously applied, a strip of transparent rigid PVC can be used.
Properties of the adhesive
180-200 °C
Low temperatures cause faulty bonding, higher temperatures - maintained for a long time - may damage the adhesive and lead to decomposition. Therefore ensure correct temperature!
**Tools can be cleaned with Kleiberit 827.0
