608.00/01 PUR Hotmelt Adhesive
Application:
For bonding thermoplastics edgebands with suitable primer application to the reverse side (e.g. ABS, PP, PVC).
Characteristics/ Directions for use:
Fast setting, high initial strength.*
* Compared to other Jowat products for this application
Processing with special equipment from moisture-proof sealed containers.
Processing temperature [ºC]: 100 – 120 (212 – 248 ºF)
Final digit 0 = yellowish opaque
Final digit 1 = white
Density at 20 ºC (68 ºF) [g/cm³]:* approx. 1.10 ± 0.10 (9.18 ± 0.83 lb./gal)
Softening point [ºC]:* approx. 65 ± 5 (149 ± 9 ºF) (Kofler Bench)
Open time at 120 ºC (248 ºF) [s]:* approx. 7 ± 3
Viscosity at 120 ºC (248 ºF) [mPa·s]: 90,000 ± 20,000
(Brookfield, Thermosel, Spindle 28, 4 RPM)
Cleaning: If necessary, flush out hot melt remnants from the melt and applicator units with Jowat Flushing Agent 930.94. For more information refer to the “PUR hot melt Manual” under the heading “Maintenance and Cleaning” (available upon request)
Storage: May be stored for 12 months after date of shipment from Jowat, in properly closed original containers, cool and dry (15-25°C).
