Jowat 93120 Flushing Agent (NOT PUR)
Purging/flushing agent in hot melt equipment.
For thermoplastic (EVA) adhesives only.
Application:
For flushing out applicator units for PO or EVA hot melt adhesives. Not to be used for
flushing out applicator units for PUR hot melt adhesives.
Characteristics/ Directions for use:
Allow all adhesive to be extruded completely. Then fill the unit with Jowat® flushing agent 931.20 and melt. The entire amount of flushing agent has to run through the hose and nozzle; then repeat the procedure to ensure that all hot melt residues have been removed. Before taking up work again, the flushing agent has to be completely removed from the equipment.
All raw materials used in the manufacturing of 931.20 are approved according to FDA guideline 175.105 for food packaging
Customer trials are required.
Specification:
Application Temperature [°C]: 160 – 180 (320 - 356 °F)
Density at 23 ºC (73 ºF) [g/cm³]: approx. 0.95 ± 0.05 (7.93 ± 0.42 lb/gal)
Softening range [ºC]: approx. 110 ± 2 (230 ± 4 ºF) (ring and ball)
Viscosity at 160 ºC (320 ºF) [mPa·s]: 1,700 ± 400
| Weight | 36 lbs |
|---|---|
| Dimensions | 15 × 15 × 16 in |
| Packaging |
Bag |
Storage: May be stored in properly closed original containers, cool and dry (15-25°C (59-77°F)). Best before date, please see container label. After the elapse of the best-before date it is essential that you again verify that the product is fit for your intended application.
