Jowat 930.94 PUR Flushing Agent
Application:
Purging/flushing agent for adhesive applicators after working with PUR reactive hot melt systems. Contains special additive to prevent chemical reaction. Available in granular or Holz-Her cartridge form. Color – Red
Characteristics/ Directions for use:
Due to a special additive, the chemical reaction of the PUR hot melt adhesive is prevented during the flushing procedure. Allow all adhesive to be extruded completely. Then fill the unit with Jowat® flushing agent and melt. The entire amount of flushing agent has to be run through the hose and nozzle; then repeat the procedure to ensure that all hot melt residues have been removed from the equipment. If this is not done, it may be possiblethat the desired crosslinking reaction will not take place when the reactive PUR hot melt adhesives are processed.
Specification:
Processing temperature: Approx. 130 - 150ºC (266 - 302ºF)
Appearance: Red
Density at 20°C [g/cm3]: Approx. 0.95 ± 0.05 (Jowat test method)
Softening range [°C]: Approx. 80 ± 10 (Kofler bench)
Viscosity at 140°C [mPas]: 50000 ± 5000
(Brookfield, Thermosel, Spindle 28, 5 RPM)
| Weight | 15 lbs |
|---|---|
| Dimensions | 14 × 14 × 6 in |
| Packaging |
Box |
Storage: May be stored in properly closed original containers, cool and dry (15-25°C (59-77°F). Best before date, please refer to label on the packaging unit.
Packaging: Remarks: In moisture-proof sealed containers. Unit size upon request.
